How do I amass these video?
Answers: TRANSFERRING VIDEO FROM CAMCORDER TO COMPUTER
Camcorders usually come next to connecting cables. Older camcorders enjoy yellow, red and white RCA cable that connect the camcorder to your TV or in this covering your computer. Newer camcorders have FIREWIRE connectors that conveniently connect to FIREWIRE connectors surrounded by newer computers be it PC or Mac.
FOR CAMCORDERS WITH RCA CONNECTORS & PROPRIETARY CONNECTIONS
If you are using a camcorder with RCA connectors next your computer must have a Video Capture Card or any munificent of video capturing device connected to your computer. A webcam is not a video invasion device.
RCA connectors/cables come in 3 colors, wan for video, red and white for left and right audio low. In some camcorders you will see the 3 outlets with the 3 colors. While other camcorders are provided near a proprietary outlet that needs a proprietary cable beside RCA connectors on the other end of the cable. These cable usually come with the camcorder.
Make the connections on the camera and connect the RCA to the outlets of your Video Capture Card/device. Color codes on the RCA and the outlets are central. The yellow RCA is carry the video signal and should be connected to the "video in" outlet of the Video Capture Card/Device. The red and white RCA cables are the vanished and right audio signal. These can be swapped without any problems.
Sometimes the camcorder have a minijack or headphone jack for outputting sound. And, sometimes the Video Capture Card/Device also uses a minijack to seizure sound. If this is the covering, only the pale RCA cable needs to be connected both to the camcorder and the computer. Use a minijack to minijack connector cable to connect the camcorder and the computer. The minijack cable replaces the red and white RCA cable. There is such a point as a "Y-Cable". The Y-Cable is a minijack on one end and 2 RCAs on the other wrap up. You can use this if the camcorder and the Video Capture Card/Device have different ways to connect audio signals. With adjectives these complexities you don't have to verbs about connecting the wrong cable because NOTHING WILL BE DAMAGED in travel case you make a mistake.
Once the connections are done you are very soon ready to seizure the video on your computer. Video Capture Cards/Devices come with programs that allow you to invasion video to a location in your computer. Captured video files are most of the times within .avi or .mpg format stored in your computer.
FOR CAMCORDERS WITH FIREWIRE CONNECTOR OR (IEEE) 1394 CONNECTOR OR i.LINK
New camcorders and up to date computers come with FIREWIRE or 1394 Connectors. These are more convenient to use. All you hold to do is connect just 1 Fireweire (1394) cable to the camcorder and the computer. Turn on your computer and produce sure all the programs that necessitate to load during startup enjoy been loaded. Connect the camcorder to the computer using the Firewire cable. Turn on your camera and set it to "play" mode. Not "record" or "camera" mode. Your computer should detect the camera and prompt you to spread out the associated program. Open the program and look for the "capture" button.
CAPTURE SETTINGS
Leave everything on default and you should be OK. Once you gain the hang of it you can start tweaking some settings. Here are adjectives settings that you might want to experiment:
Resolution - this refers to the number of pixel. A 320x240 resolution means 320 pixels horizontally and 240 pixels vertically. 320x240 is the advise capturing resolution for youtube video. 352x240 is ideal for VCD. 640x480 is the just the thing resolution for full screen computer video. 720x480 is the ideal resolution for DVD.
Data Rate - refers to the amount of facts allocated for capturing video(and audio). 300 kbps (kilobit per second) contained by mpeg-1 format is recommended for youtube. 1152 kbps in mpeg-1 format is for VCD. 2,000 kbps surrounded by mpeg-2 format is recommended for DVD. These numbers are here as reference. You will gain a low quality DVD if you record in 300 kbps mpeg-1. Commercial DVD information rate is 4500 kbps in mpeg-2 format. Data rate also determines the database size of the captured video. The lower the information rate the smaller the file.
Compression - MPEG 4 is for ipod video, MPEG 3 is for music, MPEG 2 is for DVD, MPEG 1 is for VCD. DV compression is the highest competence compression available to standard desktop/laptop computers. If you plan to capture a video for editing I suggest you appropriation in DV compression .avi report.
MAKING DVDs
You make DVDs by burning the DVDs contained by a DVD burner drive. DVD+R and DVD-R are now interchangeable types. Most commercial DVD players can feel both types. Open your DVD burning program. Most of the time DVD burners come with programs to fashion DVDs. Just follow the instructions on how to make DVDs and you're done!
There is a live discussion on how to seizure videos and take home DVDs at http://www.overdose.ph/index.php?board=1...
I wrote this long answer, from years of experience editing. This is not copied from any website. Hope this helps! - Chris Villarin
Read the instruction book.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :