But nearby isn't no software for this handycam for window xp :(((? MY CAM IS WITH TAPE :D .. pls backing;
Answers: Have you tried Windows Movie Maker? You need to move about to capture video on the disappeared side of the screen. If its not on your computer you can download it from microsoft.com. You could use Sony Vegas Movie Studio if Movie Maker doesn't work
Almost absolutely you do not need any special software.
For a MiniDv TAPE camcorder you will find a read of this article terribly useful and informative :-
http://phpbb.ulead.com.tw/EN/viewtopic.p...
The software person used is Ulead VideoStudio - you can download a free trial to see if it works for you from :-
http://www.ulead.com/vs/runme.htm
or
http://www.ulead.co.uk/vs/runme.htm
~
TRANSFERRING VIDEO FROM CAMCORDER TO COMPUTER
Camcorders usually come with connecting cable. Older camcorders have washed out, red and white RCA cables that connect the camcorder to your TV or within this case your computer. Newer camcorders hold FIREWIRE connectors that conveniently connect to FIREWIRE connectors in newer computers be it PC or Mac.
FOR CAMCORDERS WITH RCA CONNECTORS & PROPRIETARY CONNECTIONS
If you are using a camcorder near RCA connectors then your computer must enjoy a Video Capture Card or any kind of video capture device connected to your computer. A webcam is not a video capture device.
RCA connectors/cables come contained by 3 colors, yellow for video, red and white for vanished and right audio channel. In some camcorders you will see the 3 outlets next to the 3 colors. While other camcorders are provided with a proprietary outlet that wants a proprietary cable with RCA connectors on the other cessation of the cable. These cables usually come near the camcorder.
Make the connections on the camera and connect the RCA to the outlets of your Video Capture Card/device. Color codes on the RCA and the outlets are important. The pale RCA is carries the video signal and should be connected to the "video in" outlet of the Video Capture Card/Device. The red and white RCA cable are the left and right audio signal. These can be swapped short any problems.
Sometimes the camcorder has a minijack or headphone jack for outputting nouns. And, sometimes the Video Capture Card/Device also uses a minijack to capture nouns. If this is the case, with the sole purpose the yellow RCA cable requests to be connected both to the camcorder and the computer. Use a minijack to minijack connector cable to connect the camcorder and the computer. The minijack cable replaces the red and white RCA cable. There is such a thing as a "Y-Cable". The Y-Cable is a minijack on one closing stages and 2 RCAs on the other end. You can use this if the camcorder and the Video Capture Card/Device enjoy different ways to connect audio signals. With all these complexities you don't hold to worry more or less connecting the wrong cables because NOTHING WILL BE DAMAGED surrounded by case you fashion a mistake.
Once the connections are done you are now geared up to capture the video on your computer. Video Capture Cards/Devices come next to programs that allow you to capture video to a location within your computer. Captured video files are most of the times in .avi or .mpg format stored surrounded by your computer.
FOR CAMCORDERS WITH FIREWIRE CONNECTOR OR (IEEE) 1394 CONNECTOR OR i.LINK
New camcorders and new computers come beside FIREWIRE or 1394 Connectors. These are more convenient to use. All you have to do is connect only just 1 Fireweire (1394) cable to the camcorder and the computer. Turn on your computer and make sure adjectives the programs that need to nouns during startup have be loaded. Connect the camcorder to the computer using the Firewire cable. Turn on your camera and set it to "play" mode. Not "record" or "camera" mode. Your computer should detect the camera and prompt you to open the associated program. Open the program and look for the "capture" button.
CAPTURE SETTINGS
Leave everything on failure to pay and you should be OK. Once you get the suspend of it you can start tweaking some settings. Here are common settings that you might want to experiment:
Resolution - this refers to the number of pixel. A 320x240 resolution channel 320 pixels horizontally and 240 pixels vertically. 320x240 is the advised capture resolution for youtube videos. 352x240 is just the thing for VCD. 640x480 is the ideal resolution for full blind computer videos. 720x480 is the just what the doctor ordered resolution for DVD.
Data Rate - refers to the amount of data allocated for capture video(and audio). 300 kbps (kilobit per second) in mpeg-1 format is recommended for youtube. 1152 kbps surrounded by mpeg-1 format is for VCD. 2,000 kbps in mpeg-2 format is recommended for DVD. These numbers are here as insinuation. You will get a low competence DVD if you recorded within 300 kbps mpeg-1. Commercial DVD data rate is 4500 kbps contained by mpeg-2 format. Data rate also determines the file size of the capture video. The lower the data rate the smaller the record.
Compression - MPEG 4 is for ipod videos, MPEG 3 is for music, MPEG 2 is for DVD, MPEG 1 is for VCD. DV compression is the ultimate quality compression available to standard desktop/laptop computers. If you plan to occupation a video for editing I suggest you capture surrounded by DV compression .avi file.
MAKING DVDs
You craft DVDs by burning the DVDs in a DVD burner drive. DVD+R and DVD-R are presently interchangeable types. Most commercial DVD players can handle both types. Open your DVD burning program. Most of the time DVD burners come near programs to make DVDs. Just follow the instructions on how to sort DVDs and you're done!
There is a live discussion on how to capture video and make DVDs at http://www.overdose.ph/index.php?board=1...
I wrote this long answer, from years of experience editing. This is not copied from any website. Hope this help! - Chris Villarin
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :