How do I introduction video from my samsung camera to my PC?
Answers: TRANSFERRING VIDEO FROM CAMCORDER TO COMPUTER
Camcorders usually come with connecting cable. Older camcorders have ashen, red and white RCA cables that connect the camcorder to your TV or surrounded by this case your computer. Newer camcorders own FIREWIRE connectors that conveniently connect to FIREWIRE connectors in newer computers be it PC or Mac.
FOR CAMCORDERS WITH RCA CONNECTORS & PROPRIETARY CONNECTIONS
If you are using a camcorder near RCA connectors then your computer must own a Video Capture Card or any kind of video capture device connected to your computer. A webcam is not a video capture device.
RCA connectors/cables come surrounded by 3 colors, yellow for video, red and white for vanished and right audio channel. In some camcorders you will see the 3 outlets near the 3 colors. While other camcorders are provided with a proprietary outlet that wants a proprietary cable with RCA connectors on the other terminate of the cable. These cables usually come next to the camcorder.
Make the connections on the camera and connect the RCA to the outlets of your Video Capture Card/device. Color codes on the RCA and the outlets are important. The sickly RCA is carries the video signal and should be connected to the "video in" outlet of the Video Capture Card/Device. The red and white RCA cable are the left and right audio signal. These can be swapped in need any problems.
Sometimes the camcorder has a minijack or headphone jack for outputting nouns. And, sometimes the Video Capture Card/Device also uses a minijack to capture nouns. If this is the case, simply the yellow RCA cable requests to be connected both to the camcorder and the computer. Use a minijack to minijack connector cable to connect the camcorder and the computer. The minijack cable replaces the red and white RCA cable. There is such a thing as a "Y-Cable". The Y-Cable is a minijack on one back and 2 RCAs on the other end. You can use this if the camcorder and the Video Capture Card/Device hold different ways to connect audio signals. With all these complexities you don't hold to worry going on for connecting the wrong cables because NOTHING WILL BE DAMAGED contained by case you construct a mistake.
Once the connections are done you are now organized to capture the video on your computer. Video Capture Cards/Devices come next to programs that allow you to capture video to a location within your computer. Captured video files are most of the times in .avi or .mpg format stored contained by your computer.
FOR CAMCORDERS WITH FIREWIRE CONNECTOR OR (IEEE) 1394 CONNECTOR OR i.LINK
New camcorders and new computers come beside FIREWIRE or 1394 Connectors. These are more convenient to use. All you have to do is connect only just 1 Fireweire (1394) cable to the camcorder and the computer. Turn on your computer and make sure adjectives the programs that need to nouns during startup have be loaded. Connect the camcorder to the computer using the Firewire cable. Turn on your camera and set it to "play" mode. Not "record" or "camera" mode. Your computer should detect the camera and prompt you to open the associated program. Open the program and look for the "capture" button.
CAPTURE SETTINGS
Leave everything on non-attendance and you should be OK. Once you get the suspend of it you can start tweaking some settings. Here are common settings that you might want to experiment:
Resolution - this refers to the number of pixel. A 320x240 resolution channel 320 pixels horizontally and 240 pixels vertically. 320x240 is the advised capture resolution for youtube videos. 352x240 is just what the doctor ordered for VCD. 640x480 is the ideal resolution for full peak computer videos. 720x480 is the just what the doctor ordered resolution for DVD.
Data Rate - refers to the amount of data allocated for capture video(and audio). 300 kbps (kilobit per second) in mpeg-1 format is recommended for youtube. 1152 kbps contained by mpeg-1 format is for VCD. 2,000 kbps in mpeg-2 format is recommended for DVD. These numbers are here as insinuation. You will get a low characteristic DVD if you recorded contained by 300 kbps mpeg-1. Commercial DVD data rate is 4500 kbps surrounded by mpeg-2 format. Data rate also determines the file size of the capture video. The lower the data rate the smaller the wallet.
Compression - MPEG 4 is for ipod videos, MPEG 3 is for music, MPEG 2 is for DVD, MPEG 1 is for VCD. DV compression is the greatest quality compression available to standard desktop/laptop computers. If you plan to occupation a video for editing I suggest you capture contained by DV compression .avi file.
MAKING DVDs
You construct DVDs by burning the DVDs in a DVD burner drive. DVD+R and DVD-R are in a minute interchangeable types. Most commercial DVD players can handle both types. Open your DVD burning program. Most of the time DVD burners come beside programs to make DVDs. Just follow the instructions on how to get DVDs and you're done!
There is a live discussion on how to capture video and make DVDs at http://www.overdose.ph/index.php?board=1...
For a movie camera you commonly use a Firewire cable so you might involve to add a Firewire port to your PC. Or you rob the MiniDVD disk and put it in your PC. It depends on what camera you own. Or if it is a still camera then steal the media card out and put it surrounded by a PC card reader. Or if it has USB after plug the USB cable in and the files will appear surrounded by Windows as a new drive.
It pays to be a bit more specific when you ask a hardware cross-question.
USB cord
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :