Transfering video's from your camcorder to computer?
I have Windows Media Player, is in attendance anyway to get to the video's from near?
Answers: TRANSFERING VIDEO FROM CAMCORDER TO COMPUTER
Camcorders usually come with connecting cable. Older camcorders have pale, red and white RCA cables that connect the camcorder to your TV or contained by this case your computer. Newer camcorders hold FIREWIRE connectors that conviniently connect to FIREWIRE connectors in newer computers be it PC or Mac.
FOR CAMCORDERS WITH RCA CONNECTORS & PROPRIATARY CONNECTIONS
If you are using a camcorder beside RCA connectors then your computer must enjoy a Video Capture Card or any kind of video capture device connected to your computer. A webcam is not a video capture device.
RCA connectors/cables come contained by 3 colors, yellow for video, red and white for vanished and right audio channel. In some camcorders you will see the 3 outlets beside the 3 colors. While other camcorders are provided with a propriatary outlet that wishes a propriatary cable with RCA connectors on the other conclude of the cable. These cables usually come near the camcorder.
Make the connections on the camera and connect the RCA to the outlets of your Video Capture Card/device. Color codes on the RCA and the outlets are important. The sickly RCA is carries the video signal and should be connected to the "video in" outlet of the Video Capture Card/Device. The red and white RCA cable are the left and right audio signal. These can be swapped in need any problems.
Sometimes the camcorder has a minijack or headphone jack for outputing nouns. And, sometimes the Video Capture Card/Device also uses a minijack to capture nouns. If this is the case, merely the yellow RCA cable requests to be connected both to the camcorder and the computer. Use a minijack to minijack connector cable to connect the camcorder and the computer. The minijack cable replaces the red and white RCA cable. There is such a thing as a "Y-Cable". The Y-Cable is a minijack on one ending and 2 RCAs on the other end. You can use this if the camcorder and the Video Capture Card/Device enjoy different ways to connect audio signals. With all these complexities you dont enjoy to worry in the region of connecting the wrong cables becuase NOTHING WILL BE DAMAGED surrounded by case you bring in a mistake.
Once the connections are done you are now in position to capture the video on your computer. Video Capture Cards/Devices come near programs that allow you to capture video to a location within your computer. Captured video files are most of the times in .avi or .mpg format stored contained by your computer.
FOR CAMCORDERS WITH FIREWIRE CONNECTOR OR (IEEE) 1394 CONNECTOR OR i.LINK
New camcorders and new computers come near FIREWIRE or 1394 Connectors. These are more convenient to use. All you have to do is connect freshly 1 Fireweire (1394) cable to the camcorder and the computer. Turn on your computer and make sure adjectives the programs that need to nouns during startup have be loaded. Connect the camcorder to the computer using the Firewire cable. Turn on your camera and set it to "play" mode. Not "record" or "camera" mode. Your computer should detect the camera and prompt you to open the associated program. Open the progran and look for the "capture" button.
CAPTURE SETTINGS
Leave everything on defaulting and you should be OK. Once you get the sway of it you can start tweaking some settings. Here are common settings that you might want to experiment:
Resoluion - this refers to the number of pixel. A 320x240 resolution vehicle 320 pixels horizonatlly and 240 pixels vertically. 320x240 is the advised capture resolution for youtube videos. 352x240 is the ideaARution for VCD. 640x480 is the just right resolution for fullscreen computer videos. 720x480 is the just right resolution for DVD.
Data Rate - refers to the amount of data allocated for capture video(and auido). 300 kbps (kilobit per second) in mpeg-1 format is recommended for youtube. 1152 kbps contained by mpeg-1 format is for VCD. 2,000 kbps in mpeg-2 format is recommended for DVD. These numbers are here as citation. You will get a low feature DVD if you recorded surrounded by 300 kbps mpeg-1. Commercial DVD data rate is 4500 kbps surrounded by mpeg-2 format. Data rate also determines the file size of the capture video. The lower the data rate the smaller the profile.
Compression - MPEG 4 is for ipod videos, MPEG 3 is for music, MPEG 2 is for DVD, MPEG 1 is for VCD. DV compression is the chief quality compression available to standard desktop/laptop computers. If you plan to occupation a video for editing I suggest you capture within DV compression .avi file.
MAKING DVDs
You product DVDs by burning the DVDs in a DVD burner drive. DVD+R and DVD-R are presently interchangeable types. Most commercial DVD players can handle both types. Open your DVD burning program. Most of the time DVD burners come beside programs to make DVDs. Just follow the instructions on how to kind DVDs and you're done!
There is a live discussion on how to capture video and make DVDs at http://www.overdose.ph/index.php?board=1...
To solve this problem, install a firewire card. Usually the firewire card is sold complete near firewire cable. If you connect firewire cable to your camera, ON it, computer will respond promptly what to do with the camera
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :