How to journal an analogue video tape to digital?
Answers: TRANSFERRING VIDEO FROM CAMCORDER TO COMPUTER
Camcorders usually come beside connecting cables. Older camcorders own yellow, red and white RCA cable that connect the camcorder to your TV or in this satchel your computer. Newer camcorders have FIREWIRE connectors that conveniently connect to FIREWIRE connectors within newer computers be it PC or Mac.
FOR CAMCORDERS WITH RCA CONNECTORS & PROPRIETARY CONNECTIONS
If you are using a camcorder with RCA connectors next your computer must have a Video Capture Card or any form of video capturing device connected to your computer. A webcam is not a video invasion device.
RCA connectors/cables come in 3 colors, washed out for video, red and white for left and right audio subway. In some camcorders you will see the 3 outlets with the 3 colors. While other camcorders are provided near a proprietary outlet that needs a proprietary cable beside RCA connectors on the other end of the cable. These cable usually come with the camcorder.
Make the connections on the camera and connect the RCA to the outlets of your Video Capture Card/device. Color codes on the RCA and the outlets are crucial. The yellow RCA is carry the video signal and should be connected to the "video in" outlet of the Video Capture Card/Device. The red and white RCA cables are the vanished and right audio signal. These can be swapped without any problems.
Sometimes the camcorder have a minijack or headphone jack for outputting sound. And, sometimes the Video Capture Card/Device also uses a minijack to appropriation sound. If this is the casing, only the pallid RCA cable needs to be connected both to the camcorder and the computer. Use a minijack to minijack connector cable to connect the camcorder and the computer. The minijack cable replaces the red and white RCA cable. There is such a entry as a "Y-Cable". The Y-Cable is a minijack on one end and 2 RCAs on the other finish. You can use this if the camcorder and the Video Capture Card/Device have different ways to connect audio signals. With adjectives these complexities you don't have to verbs about connecting the wrong cable because NOTHING WILL BE DAMAGED in crust you make a mistake.
Once the connections are done you are in a minute ready to invasion the video on your computer. Video Capture Cards/Devices come with programs that allow you to takeover video to a location in your computer. Captured video files are most of the times contained by .avi or .mpg format stored in your computer.
FOR CAMCORDERS WITH FIREWIRE CONNECTOR OR (IEEE) 1394 CONNECTOR OR i.LINK
New camcorders and bright computers come with FIREWIRE or 1394 Connectors. These are more convenient to use. All you enjoy to do is connect just 1 Fireweire (1394) cable to the camcorder and the computer. Turn on your computer and take home sure all the programs that have need of to load during startup hold been loaded. Connect the camcorder to the computer using the Firewire cable. Turn on your camera and set it to "play" mode. Not "record" or "camera" mode. Your computer should detect the camera and prompt you to expand the associated program. Open the program and look for the "capture" button.
CAPTURE SETTINGS
Leave everything on default and you should be OK. Once you take the hang of it you can start tweaking some settings. Here are adjectives settings that you might want to experiment:
Resolution - this refers to the number of pixel. A 320x240 resolution means 320 pixels horizontally and 240 pixels vertically. 320x240 is the advise capturing resolution for youtube video. 352x240 is ideal for VCD. 640x480 is the just what the doctor ordered resolution for full screen computer video. 720x480 is the ideal resolution for DVD.
Data Rate - refers to the amount of facts allocated for capturing video(and audio). 300 kbps (kilobit per second) within mpeg-1 format is recommended for youtube. 1152 kbps in mpeg-1 format is for VCD. 2,000 kbps contained by mpeg-2 format is recommended for DVD. These numbers are here as reference. You will return with a low quality DVD if you record in 300 kbps mpeg-1. Commercial DVD notes rate is 4500 kbps in mpeg-2 format. Data rate also determines the wallet size of the captured video. The lower the facts rate the smaller the file.
Compression - MPEG 4 is for ipod video, MPEG 3 is for music, MPEG 2 is for DVD, MPEG 1 is for VCD. DV compression is the highest talent compression available to standard desktop/laptop computers. If you plan to capture a video for editing I suggest you invasion in DV compression .avi record.
MAKING DVDs
You make DVDs by burning the DVDs contained by a DVD burner drive. DVD+R and DVD-R are now interchangeable types. Most commercial DVD players can touch both types. Open your DVD burning program. Most of the time DVD burners come with programs to produce DVDs. Just follow the instructions on how to make DVDs and you're done!
There is a live discussion on how to occupation videos and take home DVDs at http://www.overdose.ph/index.php?board=1...
I wrote this long answer, from years of experience editing. This is not copied from any website. Hope this helps! - Chris Villarin
Buy a video takeover device. Sold by various companies including Pinnacle Systems, ADS Technology, Happauge, etc.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :