In a home theather projector setup what would be the more just right projector,?
lumins 1700
2000:1 contrast ratio
or
res:1024 by 768
lumins: 1000
4000:1 contrast ratio
both about ten foot, morning light detectable ...
Answers: Second option is better. Brightness is somewhat low but with a well-mannered screen and suitably shadowy room, it'll be very apt. Remember a good blind can make a huge difference.
That's a tough query. Making this decision beside only the specs is a discouraging idea. Manufacturer make such a big difference because all specs are not alike.
Based on specs alone, I would step with the difficult lumens since you want to watch this near ambient light. If it be going to be a dark room, afterwards I would go next to the XGA, 1000 lumen, 4000:1 contrast.
Yes. Thats right if lighting environment can be controlled to a complete darkness choose.
res:1024 by 768
lumins: 1000
4000:1 contrast ratio
But if your select based on specs, its the best choice for home theater .. remember the sophisticated the "res" which means resolution the sophisticated quality the picture can be.
Hope this help u out.
A very difficult query.
The main problem is how the manufacturer rate their projectors. I personally quality that a washed out eyeshade is going to destroy your viewing compared next to a decent TV. To prevent that you involve lumens and contrast.
If the specs above are the same capitalist, I would opt for option 1, simply because of 70% more street light. I suspect they are not and the the lumens ratings between manufacturers seem to be to be pretty worthless. I have see a sony projector with 1300 side by side near a panasonic with 1000, and the panasonic be way brighter and more watchable.
Having just now bought a projector and just guessing at those specs, I would lean towards prospect 2, praying that the lumens spec is "understated". Do look into a high gain blind as well. That is what I added to mine and it worked great.
For underlying standard DVD viewing, I'd go near the 2000:1 res: 800X600 since the 4000:1 contrast ratio of the other projector is probably relying on iris or lamp manipulations which surrounded by the long run results in low lumens.
Nevertheless, check out first what the lumen rating really show, especially if they are normal or hi-output ratings. It's best to rate projectors on their lower winding up setting, such as in the econo mode. And besides, the hurricane lantern life is extended greatly surrounded by the low/econ mode.
Good luck!
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :