Surround system hook up to tv and an second dvd can any1 assist Im getting no nouns from tv?
Answers: First your tv have to have audio outs for this to appear..Or you can use audio plugs red&white from your cable box into receiver...If you choose to do this remeber that you cannot use the coax to connect to tv..you enjoy to know use yellow for video which will walk to the tv...red ,white to receiver. the dvd player should connect to addressee using the audio option...The video out can be run straight to the tv...then select av1, av2 ,etc to attitude...remeber tv is broadcasted in stereo 2 vessel...not surrond so all channel will not sound moral....For further help you can contact me through here...Good luck
First you own to use optical audio cables to go and get the surround sounds. Your TV must have digital audio output connector( most HDTV will own it but the connector looks different than the one on your amplifier. Instead of just pulling out the digital input's cover close to the one behind the amplifier, you own to remove the plastic cover of the digital output of the TV in command to be able to plug it within by using a small flat screwdriver, make sure don't puncture it too thoughtful into the output because you could damage the optical fiber.).Connect the audio cable from your TV's optic digital output to the receiver's 1st optic digital input. Then connect your DVD's digital output to the amplifier/receiver's 2nd digital input. If your amplifier or DVD player don't enjoy digital in/output, use coaxial audio in/out put respectively. With this set up, when you want to play TV, you switch your amplifier/receiver to AUX and the receiver will detect whether it is optical 1 signal from TV or optical 2 signal or coaxial audio signal from your DVD player. If your addressee is an older model, you may enjoy to manually select the source. To get the surround nouns, make sure adjectives video and audio sources are digital, including the cable box or HDTV capable antenna. Connect the cable box's HDMI output to the TV's HDMI input after you will get a complete HOME THEATER. Question going on for how to hook up, read the receiver's manual. Good luck and soak up
Att: the coaxial audio in/output looks similar to a RCA connector, don't get confused near the cable/TV antenna coaxial connector.
Is your TV connected to your receiver?
Your TV or cable box have to be connected to the receiver for it to play purely TV only.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :