Bi-amp relieve?
Answers: With your current setup, you won't be able to pick up the true authority of a true bi-amp setup because you don't have an live crossover before the amplifiers and the serious crossovers are still in the speaker box. A bi-amp setup is usually used to permit one amplifier drive the high and mid-frequency box of the speakers while letting another amplifier take diligence of the bass section. If an involved crossover is put in front of the amps so simply high/mid-frequency goes to the high/mid-frequency and bass frequencies progress to the bass section, you can completely verbs the passive crossovers within the speaker box. This means more usefulness because none of the amplifier power will be wasted as warmness by a passive crossover system, and you also own much more control over how the speakers sound. I individually use a DBX 260 to route the different signals to the amps running my Martin Logan Monolith IIIs. If you don't have pliable crossovers in the speakers and you aren't running an influential crossover before the amps, you are going to verbs your tweeters by feeding them too much low frequency substance.
That being said, I am assuming that you are going to maintain the passive crossovers surrounded by the box and just use two amplifiers; one to power the highs/mids, and one to power the bass bit. In this case, you involve to take stale the piece of metal the connects the positive terminal of the high/mid section next to the positive terminal of the bass section. Then, do like peas in a pod thing near the negative terminal. Hook up one amplifier to the high/mid terminals resembling normal, and hook up the other amplifier to the bass terminal. Here is a good description of what I stingy: http://www.fluance.com/wiring.html .
Also, you are going to want to route the signal from the Pioneer receiver to the Adcom. This is the strong part. If you luck out, in attendance might be an RCA preout that will send out the signal and allow it to be controlled by the volume control. All you would necessitate would be a simple RCA y-connector. However, this is really rare in this day and age to have a preout/main contained by on anything more than a 2 channel addressee. The next risk would be a speaker level to row level converter which will humiliate the sound trait somewhat, but it is probably the most feasible solution. The final option I can reflect on of is to route the signal from the source (i.e. CD player, DVD, etc) to the Adcom via a y-connector, but this manner no more volume control for the Adcom. Plus, it won't work for higher title connections like HDMI. The bottom procession is there is no cheap and graceful way to route the signal.
I would use the Left and Right preouts of the pioneer amp to connect to the Adcom amp to power your primary speakers. then run everything else sour the receivers amps. You give no model numbers, and you do not want to bi-amp in this instance.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :