Does the component cable own to be surrounded by the white and red HD inpts, or surrounded by the regular blue, red, and green inpt
Answers: Component Video:
Component Cables are used to send video to a display using three RCA cable. It use a green red and blue cable.
The Green cable carries Sinc, and Luminance. It does not transport a Green video signal, (just pluging the green cable in and you one and only get a Black and White picture, Go ahead and try it).
The Red cable does transport the Red signal and Blue carries Blue.
You have need of to conect them to your display Green to Green, Red to Red, and Blue to Blue.
Component Video can carrie many forms of video.
480i
480P
720P
1080I
And YES 1080P!
Finding a device to play 1080P is the trick. Not various devices let you transport 1080P using Component. To bad for adjectives the older HDTV out nearby.
Component is different than RGB. RGB and RGBHV are older form that used four or five cable to send video to a display.
Black for H-Sinc.
White for V-Sinc.
Green for Green
Red for Red
and Blue for Blue
Some of the newer display system would allow you to use one cable for both H-Sink and V-Sinc. Thats would be the covering in a four cable system. I use these setup's support in the well brought-up old days (1999 and earlyer).
It would enjoy to be the three red, blue, and green input for the HD. The normal red/white/yellow inputs are non HD. Red and white would be your gone and right channel audio. Yellow would be your lone video. In the HD format, you own three colors, corresponding to the colors your TV uses to make a display, individual red, blue, and green. (also known as a RGB connection).
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :