I Need A Telephone Network Interface Device (NID)?
Answers: yes, don't mess beside the phone company!
The Network Interface Device (NID) is a phone company installed device that connects your inside wiring to the mobile phone network. It is a gray box outside your house, probably mounted close to the electrical meter. It contains a modular plug that allows you to disconnect all inside electrics and connect a working phone to test whether the local exchange framework is working. The NID has two "sides" - one for the phone company and one for you, "the customer access" side. You should not attempt to enter the phone company side of the NID. All of the electrics you need to do is completed on the customer side of the NID. In some elder installations, you may not have a NID. Instead, you will find a "protector block", a small plastic covered box where on earth the cable coming out of your house connects to the phone company's cable leaving your house. The protector block serves duplicate purpose as the NID, but does not provide a modular jack where you can check if you are getting dial tone from the phone company. If a phone company technician comes to your home on a service ring up, a NID will be installed at no charge to you, if time permits. If you do not hold a NID, one should be installed when you have a second strip connected.
you can to one of 2 things, either purely connect all the wires together inside of a phone jack:
blue/white (or green) to green
solid blue (or red) to red
or you can connect the wires comming from the outside to a phone jack, after get a connecting block near a modular plug, 725a block... the inside wiring will connect to a screw terminal inside this box, and this plugs into the jack you installed, for undemanding seperation and testing of your phone row
if you have lead maintainace then a moment ago call them and hold the phone co repair it for you
From your description, it sounds like the "box" be either a NID or an matured protector. Simply connecting the telco wires direct to your inside wires is not the correct solution. If the builder removed the NID or old protector, you would own no lightning/surge protection. That poses an electrical and fire hazard inside your home. Recommend you contact the telco and own them install a new NID or protector beside proper ground bond. Will probably be a charge, but that is better than a lightning strike burning the house down or electrocuting a family unit member.
Morris, gratitude for seeing fit to quote text from HomePhoneWiring.com. Would hold been a nice touch to attribute where on earth you got the info.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :