Eagle Aspen Satellite Finder booklet?
Answers: Are you talking something like this thing?
http://www.solidsignal.com/prod_display....
I've get one. I probably have the instruction book laying around somewhere but I'll lately tell you how to use it. First, gross sure your receiver is unplugged. Changing your satellite connections next to the receiver powered or on can vandalize the receiver. Now, hook up your LNB to the meter. Next hook up the meter to your heir. The meter goes surrounded by between the dish and the receiver. It's definite on the black plastic of the meter which connector gets hooked up to what. Now, power it up. Point your dish at an nouns of the sky with no signal. Note that nearby is a small amount of signal from the ground called ground tumult so don't point there. Also, don't simply place your paw over the LNB as your hand will if truth be told reflect the LO signal support into the LNB and show up as a weak signal. If your dish is already pointed after the hand method is fine. Now, adjust the knob on the front of the meter until it is in recent times barely starting to budge the meter and starting to whistle. This adjust the sensitivity of the meter so that you can see as soon as you get the slightest signal. Now point the dish and nub up as best you can on the desired satellite. You'll have to use your heir too to help identify WHAT satellite you're pointing at because this cheapo meter is dumb and will register any and every satellite signal. Once you own it somewhat peaked, you can now turn down the sensitivity of the meter to support peak it even more. When done, unplug your addressee from power again, redo your connections taking the meter out of the smudge and that's it!
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :