Need minister to using PalmTX?
Answers: The TX should recognize the Sandisk SD card as this is the brand that I use next to my TX.
The TX makes a "duh doink" nouns when the SD card is inserted into the expansion slot of the TX and the card is recognized. From at hand you can open the "Card Info" application and format and designation the card.
If the TX does not make that nouns then the contacts surrounded by the TX are dirty and pushing in and releasing the SD card several times may wear ample of the oxidation off of the TX's contacts so the card is "found".
Push the card within and out several times, try putting some Isopropol alcohol on the contacts of the SD card and pushing it in and out several times again.
Try putting the SD card contained by a card reader and seeing if the card is recognized by your PC. If it is identified in a card reader next your TX contacts need to be "worked" so the oxidation is worn away and the SD card make positive contact with the expansion slot.
If you catch the TX to recognize the SD card, google "FileZ" a freeware folder utility that will allow you to move / manipulate files surrounded by the TX's internal memory and on the SD card.
Good luck.
smash it with a sledge hammer 19 times flush it and go keep watch on mash.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :