I enjoy two sky boxs and one sit dish can i conect them both to the dish?
Answers: Officially you need to hold an LNB with two separate independent outputs (it's contained by fact two LNBs within one case) with a cable going to respectively sky box. Then you can watch anything you like surrounded by each room.
Since you are glowing to have one and the same channel surrounded by both rooms, then you can use a short time ago one sky box. The sky box has two outputs for two tvs. You freshly wire an in-flight lead from respectively output to each TV (or a Scart organize to the TV nearest the sky box and an aerial front to the other). But then you are down to analogue ability picture and no stereo from the set connected via the aerial front - probably OK for the bedroom. That is the easiest way to jump.
You can actually connect the two sky boxes to the single output from the dish, but as you suspect, you will be constrained in what channel you can watch. You should use a splitter near a a DC block to one side. Then, the sky box connected to the non-DC-blocked output of the splitter will control the polarity and band of the LNB. The other sky digibox will know how to tune in to the channel that use the same polarity/band special by the master digibox. Both digiboxes can be connected to the TVs using Scart leads, for best picture part and stereo.
You can also use a video sender from the digibox to the second TV. The new ones use the 2.4 GHz decoration and are quite well-mannered. They give stereo but an analogue picture.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :