How do I net the reception better using rabbitt ears on a TV lacking cable? Any tricks?
Answers: There is a lot of "art" contained by adjusting rabbit ear antennas, but you can cut down on the guess work by knowing something give or take a few how antennas work.
-
Go to the first link and find out the direction, distance, and frequencies of your local analog TV transmitters
Look at your index; if there are any analog channel between 2 and 13, look at the second web interconnect and adjust the length of the "ears" to the lowest drain #. The ears mostly receive (VHF) channels 2-13.
If adjectives the analog channels are between 14 and 69, collapse the ears to their shortest length and move them horizontal.
There should be a loop , dish, or figure 8 on your antenna; this mostly receive analog channels 14-69.
TV signals emulate off of flat metal objects, including aluminum foil back insulation, metal window screen, and the wire mesh used contained by stucco & fake adobe construction. Building materials, concrete, dirt, and dampen absorb TV signals, including stacks of salt sea otherwise known as human beings. Salt sea also conducts electricity, so if close enough they become "part" of the antenna.
After you absorb adjectives these things, you are ready to apply the "art" of adjust TV antennas.
Look at what is between your TV antenna and the line of site to the TV transmitter antennas. Is here something obvious close to a refrigerator or aquarium in the track?
Two likely obedient locations are as high as you can locate the antenna (avoiding the stacks of salt sea problem) or in front of a pane facing the TV transmitters (avoiding absorption by building materials problem).
If you can't go and get what you want with the rabbit ears and don't want to do closely of research, for about $60 you can gain a Winegard SS-3000 antenna which is about as biddable as a general purpose indoor antenna can bring. Depending on the specifics of your situation, there could a few better choices. Maybe. Depending on the location of the TV transmitters and what your TV signal looks like in a minute.......
--------------------------------------...
If your TV doesn't have a digital tuner, you will entail a converter box between your antenna and TV after 2/17/09 when the analog broadcasts are going to be shut down. Digital and analog TV use the same antennas, but unlike analog channel, digital channel # don't relate to the actual frequency the transmitter uses. The "real" depression a digital broadcast uses can be referred to as "real", "actual", or "RF" channel to be precise the same frequency as the equivalent analog furrow #.
See last association for info on digital converters for older TVs
Give the nieghbours kid 5$ to hold it up on the roof.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :