Programming instructions for Innovage Jumbo Remote?
Answer:
You can search the codes for ANY device by:
1. Turn on the device (i.e. TV, VCR, DVD, etc.)
2. Hold the "Codes" button 'til you see the red light on the remote.
3. Press the device button ( TV, VCR, etc.) once.
4. Press the power button (top right) once to see if the device turns off.
5. The codes will advance automatically, so press power and wait a second (to see if device turns off, again)
6. Continue pressing and pausing (maybe once per second) You want to find the right code without missing it!
7. Once the device turns off, then press the enter button to save.
8. Repeat with next device.
9. Good luck. (remember, 300 seconds is only 5 minutes, not too much to ask for getting the remote working.)
I found some code numbers for the Phillips TV. # 0054, # 1454 # 0690.
For the JVC TV, the numbers are : # 0463 , # 0053 Those are the only ones I could find. Hope one works. On both TVs, there should be buttons on the front of the TV to access the on-screen menu, so you can adjust the settings. All the remote will do is turn it off & on & control the volume & change the channels. The info that came with the Universal remote should tell you how to put one of those numbers I gave you into it to see if it will turn it off & on etc.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.