Some of my tv channel aren't working?
Answers: UNPLUG the power cord from your Cable box for 5 minutes, next plug it back contained by and wait 2 - 3 minutes for your box to reboot....
You should catch your TV stations back....
If you don't own a Cable box, then AUTOPROGRAM your TV stations AFTER making sure the Cable coax is connected to the Cable and NOT the Air nouns on the back of your TV set....
run to your menu and do the add/delete channels. Say scan for channel or search for channel. That should work for you.
There are channels that are going strictly digital nouns and soon in the year 2009 here will no longer be any analog transmission. At that time anyone who have an older TV will not be capable of see anything. After you scan for all the channel that your TV can receive start looking into a new TV.
Check this out: http://www.fcc.gov/cgb/consumerfacts/dig...
This happen to me and it seems that it be my television. For some foundation half the channel no longer worked. My television died in six months of this and it was ten years infirm.
But there are things you can do to cause sure that this is or is not the case. One is to unplug your box from cable and plug it into the wall, add rabbit ears ($4)if needed and see if it works. If you are getting matching response then autoprogram the stations once again to kind sure that your television is defective.
If not, then the problem is beside your cable. Hook your television up to a cable outlet that works and spawn sure your television works correctly next to cable. Check your original cable to variety sure the connections are tight. Then if the television is still broken, move the original cable to the position on the splitter that the 2nd cable be on. See if your television works. If so, achieve a new splitter or avoid the first splitter position. If not, attain a new cable to replace the inspired cable.
More than likely it is because you don't hold a Cable Box. The tuner in your TV is outdated and isn't competent to pick up all the channel that are otherwise available.
Contact your cable provider and find out if this is the case, and possibly draw from yourself a box. Its usually around $10 extra a month, and you can also get HD Channels on your Analog TV.
Go into your prime menu on the TV & look for " initial start-up" or "autu-programming", which ever they call it & start that going so your TV 's tuner can scan the channel you have available & once it's gone through this, you might necessitate to " save" settings or hit enter, or neither one, depending on the make of TV. That scan should see ALL your channels, and sanction them all surrounded by the future. Hope this works.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.
Related Questions :