What is the best setup to distribute a camera signal to 50 TV sets placed in different rooms & floors?
Answer:
you need to mix your signal with an editing deck.
Then broadcast your signal across the school.
you need tv amplifiers to boost the signal as it weakens the farther you go, the worse(cheapest) you tv cable is and the more tv's you connect.
you may want to connect your amplifier to one socket per floor, and on each floor have an amplifier, and connect all your tvs after that.
you may want to get a professional to install it to get the same picture quality on each tv.
other ways are
-get a small tv transmitter and have each tv use an aerial and receive your mini tv station. you may need an FCC licence to do that.
-your school may have network connections already.
you could go digital and use something like windows media encoder to stream the video to all your locations.
each location would need a computer and network connection (you may be able to use wireless in some locations)
The easiest way is to use a modulator to give you an "RF" signal. Then amplify the RF signal and distribute that through a normal "cable" distribution system. Some modulators will do audio also.
The other way is to "broadcast" the RF signal with a small television transmitter. This may require an FCC liscense.
You can modulate the signal and transmit it using low power. The other way is to use Co-axial cables along with an amplifier, modulator splitters and distributors. and connect it to the TV's.About the power of the amplifier and other details get in touch with your cable operator who would be able tohelp you do it.
The answers post by the user, for information only, CeQnA.com does not guarantee the right.