Help Asap!?
I've tried everything but it won't come back on. Can someone please help me. I'll vote whoever gives me the advice to get it back on as the best answer. Thanks.
Answer:
What remote do you have? If you have the silver one that says synergy V on it you have hit the input mode on the box. At the bottom of the remote hit the video source button.
If that doesn't work make sure your digi box is definitely on and try switching inputs wait about 10 seconds after you hit the button, once you see the screen your all set. If you cant figure it out call Comcast and have them come out. Most of the techs in my office have a rule if it takes less then 5 minutes to fix there is no charge.
try unplugging the tv for about 5 minutes then try again. you may have to reset your tv to previous settings. .
http://www.comcast.com/medialibrary/1/2/...
Go ahead and just call Comcast! Their number is on your bill. They have people there all the time and are very nice with their customer service! I'm always loosing my channels too, the remote is too complicated for me!
You changed the input mode. If you have a button that says mode, or tv/av, or something like that, try that button (sometimes pushing it a couple times cycles through all the modes). Otherwise, go through the menu and look for an option to change the input mode. If all else fails, unplug the tv, wait a couple seconds, then plug it back in. You might lose all your preset channels, but it should go back to normal though. Good luck.
what you did was hit the tv/video or tv/vcr button. you have one of those on your remote. you may have to hit it a couple of times. i have 3 separate video inputs on mine.
There are two buttons on top generally one says power the other tv, in the middle of those is a video1 and below that video2 and audio and satalite--push the tv button twice then power off, then push tv again it should come back on. Good luck!
The answers post by the user, for information only, CeQnA.com does not guarantee the right.